CGI Parameters
Most of the CGI Parameters can be changed with buttons, but there are some which are only accessible by adding them directly to the url.
List of Parameters
columns
Pages: status overview
Description: Sets the number of columns
Values:
-
any number greater than 0
Example: /thruk/cgi-bin/status.cgi?hostgroup=all&style=overview&columns=5
debug
Pages: availability reports
Description: Creates a file with debug information regarding this report
Values:
-
1: enable debug mode
Example: /thruk/cgi-bin/avail.cgi?host=HOSTNAME&debug=1
hidetop
Pages: status pages
Description: Show/Hide the status totals header.
Values:
-
0: show top panel
-
1: hide top panel
Example: /thruk/cgi-bin/status.cgi?hidetop=1
minimal
Pages: status page
Description: Hides almost all user interface buttons. Useful for monitor screens where only the current problems should be displayed.
Values:
-
1: Activates minimal mode
-
2: Activates minimal mode but keeps backend sites panel
-
3: Activates minimal mode and hides filter and pager
Example: /thruk/cgi-bin/status.cgi?host=all&servicestatustypes=28&minimal=1
nav
Pages: all pages
Description: Show/Hide the navigation. Only useful in non-frames mode.
Values:
-
0: hide navigation
-
1: show the navigation
Example: /thruk/cgi-bin/tac.cgi?nav=0
noexternalforks
Pages: all pages
Description: Skip external page generation. Used primarily in reports.
Values:
-
no value
Example: /thruk/cgi-bin/avail.cgi?noexternalforks
noheader
Pages: status pages
Description: Show/Hide the status totals header.
Values:
-
no value
Example: /thruk/cgi-bin/status.cgi?noheader
refresh
Pages: all pages
Description: Sets refresh timer to a custom value.
Values:
-
refresh interval number in seconds
Example: /thruk/cgi-bin/status.cgi?refresh=30
